• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
CONTROL BOX REPLACEMENT INSTRUCTIONS (Continued) - TM-5-1940-277-34_184
ENGINE MOUNTS AND BRACKETS REPLACEMENT INSTRUCTIONS

TM-5-1940-277-34 Boat Bridge Erection Twin Jet Aluminum Hull Model USCSBMK1 (1940-01-105-5728) Manual
Page Navigation
  163    164    165    166    167  168  169    170    171    172    173  
TM 5-1940-277-34 CONTROL BOX REPLACEMENT INSTRUCTIONS (Continued) LOCATION ITEM ACTION REMARKS j. Reinstall Use flat tip regulator box screwdriver. cover (9) and secure using two screws (8). k. Reinstall Use flat tip control box screwdriver. cover (7) and secure using four screws (5) and four washers (6). l. Install con- Use 10 mm socket trol box (3) with extension. on four studs (4) and secure to side of boat using four nuts nuts (1) and four washers (2). m. Connect plug (17) and secure by tightening collar (16). n. Reinstall See page engine wiring "Engine Wiring harness on Harness Replace- engine. ment Instruc- tions" for installation procedures. 2-159 (2-160 Blank)







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.