• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
ENGINE MOUNTS AND BRACKETS REPLACMENT INSTRUCTIONS (Continued) - TM-5-1940-277-34_191
ENGINE MOUNTS AND BRACKETS REPLACMENT INSTRUCTIONS (Continued) - TM-5-1940-277-34_193

TM-5-1940-277-34 Boat Bridge Erection Twin Jet Aluminum Hull Model USCSBMK1 (1940-01-105-5728) Manual
Page Navigation
  170    171    172    173    174  175  176    177    178    179    180  
TM 5-1940-277-34 ENGINE MOUNTS AND BRACKETS REPLACMENT INSTRUCTIONS (Continued) LOCATION ITEM ACTION REMARKS e. Rear bracket a. Remove. Use 5/8 in (19),0 socket, 1/2 in bolts (20) drive ratchet and 4 lock- and 6 in washers (21) extension. b. Discard lockwashers. f. Fuel return Remove. Use 1/2 in line bracket socket with (22) at star- 1/2 in drive board rear ratchet. bracket (19) and setscrew (23) g. Engine mount Remove. Use 3/4 in (24), 2 socket, 1/2 in bolts (25), drive ratchet 2 washers (26) and 3/4 in and 2 nuts (27) box wrench. INSTALLATION 4. a. Engine mount Install securing Use 3/4 in (24), 2 mount to boat socket, 1/2 in bolts (25), frame. drive ratchet 2 washers and 3/4 in (26) and 2 box wrench. nuts (27) b. Engine Clean face where assembly new bracket is to be fitted. c. Rear bracket Install securing Use 5/8 in (19), 4 bracket to socket, 1/2 in bolts (20) cylinder block. drive ratchet and 4 lock- and 6 in washers (21)  extension. 2-167







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.