• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
TRANSMISSION OIL PUMP REPLACEMENT INSTRUCTIONS (Continued) - TM-5-1940-277-34_354
TRANSMISSION OIL PUMP REPLACEMENT INSTRUCTIONS (Continued) - TM-5-1940-277-34_356

TM-5-1940-277-34 Boat Bridge Erection Twin Jet Aluminum Hull Model USCSBMK1 (1940-01-105-5728) Manual
Page Navigation
  333    334    335    336    337  338  339    340    341    342    343  
TM 5-1940-277-34 TRANSMISSION OIL PUMP REPLACEMENT INSTRUCTIONS (Continued) LOCATION ITEM ACTION REMARKS REMOVAL 1. Front pump 4 attaching Remove. Use 1/2 in socket housing (1) bolts (2) with ratchet. 2. Transmission (3) Front pump Slide pump Drive gear will housing (1) assembly stay on shaft. squarely off shaft. 3. Transmission (3) a. Drive gear Pull gear off Use hands. (4) shaft. b. Front pump Remove and Use hands. gasket (5) discard. c. Woodruff Remove from Use screwdriver. key (6) slot in shaft and retain for use in instal- lation. ASSEMBLY NOTE A new oil pump will come complete with oil seal.  If the pump has been removed for a reason other than to replace  the  pump,  the  oil  seal  should  be  replaced  before  installing  the  pump.    Steps  9a  and  9b  do  not apply for new pump installation. 4. Front pump a. Oil seal (7) Remove and Use seal puller. housing (1) discard. 2-339







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.