• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
TRANSMISSION OIL PUMP REPLACEMENT INSTRUCTIONS (Continued) - TM-5-1940-277-34_358
TRANSMISSION ASSEMBLY REPLACEMENT INSTRUCTIONS

TM-5-1940-277-34 Boat Bridge Erection Twin Jet Aluminum Hull Model USCSBMK1 (1940-01-105-5728) Manual
Page Navigation
  337    338    339    340    341  342  343    344    345    346    347  
TM 5-1940-277-34 TRANSMISSION OIL PUMP REPLACEMENT INSTRUCTIONS (Continued) LOCATION ITEM ACTION REMARKS INSTALLATION CAUTION Once pump is positioned, it must be oriented to correspond with the direction of engine rotation.  For this application the portion of the pump housing marked with an arrow pointing to the right should be at top of transmission.  Otherwise pump will not function when engine is started. NOTE Cover splined portion of input shaft to protect rubber lip of pump oil seal during assembly.  Use pump oil seal sleeve. 6. Transmission Front pump Install squarely A slight rotation housing (1) on shaft of pump will insuring that allow gear teeth seal is not to engage and damaged or pump to seat. deformed. 7. Front pump 4 attaching Install and Use 1/2 in socket housing (1) bolts (2) torque to and torque 17 - 20 ft-lb. wrench. 2-343 (2-344 Blank)







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.