• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
HYDROJET ASSEMBLY REPLACEMENT INSTRUCTIONS (Continued) - TM-5-1940-277-34_368
HYDROJET ASSEMBLY REPLACEMENT INSTRUCTIONS (Continued) - TM-5-1940-277-34_370

TM-5-1940-277-34 Boat Bridge Erection Twin Jet Aluminum Hull Model USCSBMK1 (1940-01-105-5728) Manual
Page Navigation
  347    348    349    350    351  352  353    354    355    356    357  
TM 5-1940-277-34 HYDROJET ASSEMBLY REPLACEMENT INSTRUCTIONS (Continued) LOCATION ITEM ACTION REMARKS REMOVAL NOTE Before performing next step get a small container to hold oil in reservoir. 1. Hydrojet Oil pipe (1) Loosen clamp. Use screwdriver. compartment Disconnect hose Drain oil into and drain oil. container. 2. Drive shaft 4 nuts (3), Remove bolts, Use 10 mm wrench guard (2) 4 washers (4), nuts, washers and 10 mm socket 4 bolts (5), and cap and set with ratchet. cap (7) and aside. 2 spacers (8) 2-355







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.