• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
STEERING ASSEMBLY REPAIR INSTRUCTIONS - SCOOP REPLACEMENT (Continued) - TM-5-1940-277-34_408
STEERING ASSEMBLY REPAIR INSTRUCTIONS - SCOOP REPLACEMENT (Continued) - TM-5-1940-277-34_410

TM-5-1940-277-34 Boat Bridge Erection Twin Jet Aluminum Hull Model USCSBMK1 (1940-01-105-5728) Manual
Page Navigation
  387    388    389    390    391  392  393    394    395    396    397  
TM 5-1940-277-34 STEERING ASSEMBLY REPAIR INSTRUCTIONS - SCOOP REPLACEMENT (Continued) LOCATION ITEM ACTION REMARKS REMOVAL 1. Cover (1) a. Upper mount- Remove. Use 17 mm wrench ing nut (2), and 17 mm socket washer (3) with ratchet. and bolt (4) b. Scoop retain- Loosen and swing Use 19 mm wrench ing and lower cover rearward and 19 mm socket mounting bolt to gain access with ratchet. (5) to top of tail pipe. NOTE Scoop control in full reverse for next step. 2. Jet nozzle (6) a. 3 nuts (7), Remove one on Use 17 mm wrench. 3 steel bottom and one washers (8) each side with and 3 tufnol access from top. washers (9) b. Jet nozzle Pull free from Use hammer to (6) tail pipe. free nozzle. 3. Scoop (10) Control pivot Remove nut and Use 19 mm wrench (11), nut (12), washer and with- and 19 mm socket steel washers draw pivot from with ratchet. (13) and tufnol scoop (one each This will free washer (14) side). scoop to rotate around its mounting bolt. No damage will result. 2-399







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.