TM 5-1940-277-34
STEERING ASSEMBLY REPAIR INSTRUCTIONS - SCOOP REPLACEMENT
(Continued)
LOCATION
ITEM
ACTION
REMARKS
4.
Cover (1)
a
Scoop retain-
Remove nut (15)
Use 19 mm wrench,
ing and lower
and washer (16).
19 mm socket, and
mounting bolt
Drive bolt back
ratchet. Use
(5)
until it clears
hammer and punch
cover mounting
as required. Use
sleeve.
one person each
side to prevent
binding and
damage.
b.
Cover (1)
Remove and lay
aside.
5.
Scoop (10)
a.
Scoop retain-
Remove bolt.
This will free
ing and lower
a large plain
cover mount-
washer (17),
ing bolt (5)
small plain
washer (18) and
small insulating
washer (19).
b.
Trunion (20)
Push from inside
There is one each
of tail pipe
side. When
mounting toward
second trunion is
outside of scoop
pushed clear of
to free scoop.
tail pipe
The large insu-
mounting the
lating washer
scoop will be
(21) will be
free for removal.
freed and drop
Use one person
out as trunion
each side to pre-
is pushed back
vent binding and
through scoop.
damage.
Do not lose it.
c.
Scoop (10)
Remove.
CAUTION
Do not damage surface of the trunion.
2-401