TM 5-1940-322-24
0124 00
TRANSMISSION PRESSURE SENDING UNIT REPLACEMENT (Contd)
NOTE
Both transmission pressure sending units are replaced the same
way. This procedure covers the replacement of one transmission
pressure sending unit.
Tag all lead wires during removal to assist with installation.
REMOVAL
1.
Remove two nuts (6), lockwashers (5), and electrical leads (7) from transmission pressure sending
NOTE
Have container ready to catch transmission oil.
2.
Remove transmission pressure sending unit (4) from elbow (2) on transmission oil pump (1).
INSTALLATION
1.
Apply thin coat of sealing compound to threads (3) on transmission pressure sending unit (4).
2.
Install transmission pressure sending unit (4) on elbow (2) of transmission oil pump (1).
3.
Install two electrical leads (7) on transmission pressure sending unit (4) with new lockwashers (5) and
nuts (6).
4.
Start engine and check transmission pressure sending unit (4) for leaks, oil level, and operating
pressure on gauge (TM 5-1940-322-10).
5.
6.
1
6
7
~
5
2
4
3
END OF WORK PACKAGE
0124 00-2