j. Reinstall the cable retainer block (1), retaining bolt, (2), and retainer (3) so that the boom cable (4) runs between
the cable retainer block (1) and the sheave (5). Ensure that dolly retainer latch is securing dolly to front of cradle base.
Do not allow cable to snag on rear of transporter. Serious injury may result if cable snags on
transporter and then breaks or snaps loose.
k. Pull the winch control lever to rewind the boom cable. Lift the dolly end of the boat cradle until the forward end
stop pins clear the stop brackets on the transporter rollers.
l. Release the transporter parking brake and the brake lock.
m. Pull the boom control lever to lower the boom. Operate winch as needed to position the guide and locking
bracket into the boom center slot. Pay out the cable until the cradle front stop pins rest on the rear roller stop brackets.
Lower the boom to about 3 feet.