ENGINE GENERATOR REPLACEMENT (Sheet 1 of 2) (650 AMP GENERATOR)
1/2-inch open and closed end wrench
3/4-inch open and closed end wrench
9/16-inch open and closed end wrench
13/16-inch open and closed end wrench
15/16-inch open and closed end wrench
12-inch adjustable wrench
Pliers, slip joint
Ground hop kit (Item 31, Chapter 3, Section I)
Box wrench (Item 4, Chapter 3, Section I)
Silicone compound (Item 32, Appendix D)
Two wooden blocks
Rags (Item 65, Appendix D)
Generator weighs approximately 125 pounds. Injury to personnel or damage to equipment could result through
1. Place two wooden blocks under generator (A).
Using 3/4-inch wrench remove electrical leads (B, C).
Using 15/16-inch wrench remove oil inlet hose (D)
and drain oil into suitable drain pan.