FUEL TANK CAPACITOR AND HOUSING ASSEMBLY REPLACEMENT (LEFT)
(Sheet 3 of 5)
Using screwdriver, remove four screws (V) and lockwashers (W) from securing adapter
(M) to cover (H). Separate cover (H), gasket (X) and adapter (M).
1 3 . Discard gasket (X).
CLEANING AND INSPECTION:
Using putty knife, clean all areas where gaskets were mounted.
T o prevent personal injury, wear
Dry clearning solvent P-D-680 is toxic end flammable.
protective goggles and gloves and use only in a well-ventilated area. Avoid contact with skin,
eyes, and clothes don't breathe vapors. Do not use near open flame or excessive heat. The
flash point for Type #1 Dry Cleaning Solvent is 100°F (38°C) and for Type #2 is 138°F (50°C).
If you become dizzy while using cleaning solvent, get fresh air immediately and get medical aid.
If contact with eyes is made, wash your eyes with water and get medical aid immediately.
Using dry cleaning solvent and lint-free cloth, wipe gasket surface clear.
Inspect cable and adapter (M) and cover (H) for damage. Replace damaged parts.
Go on to Sheet 4