FORWARD INBOARD BELL CRANK ASSEMBLY REPLACEMENT (Sheet 1 of 2)
9/16 in. combination box and open end wrench
PRELIMINARY PROCEDURE: Block tracks to prevent vehicle movement
Remove operators floor access plate (page 17-10)
1. Using 9/16 inch wrench, remove two
bolts (A) from bell crank (B).
Push rods (C) and (D) out of the way.
Using pliers, remove cotter pin (E).
4. Using 9/16 inch wrench, remove nut
( F ) , washer (G), and washer (H).
Remove bell crank (B) and washer (J).
Go on to Sheet 2