FENDER AND SHIELD (REAR) REPLACEMENT (Sheet 5 of 7)
Install shield (B) to fender (L) using three screws (M), washers (N), and nuts (P).
Using 9/16 inch socket on screw (M) and 9/16 inch wrench on nut (P), tighten screw (M)
and nut (P).
Install support No. 5 (Q) using four screws (R), washers (S), and lockwashers (T).
Using torque wrench and l-inch socket, tighten four screws (R) to 125-130 lb-ft (169-176
Go on to Sheet 6