TM 5-5420-202-34
POWER TAKEOFF REPAIR (Sheet 4 of 8)
16.
Using external retaining ring pliers,
remove retaining ring (T) from shaft
(Q).
17.
Using arbor press, support
bearing (R) with large spline
end of shaft (Q) facing down.
Press shaft (Q) from bearing (R).
18.
19.
Position power takeoff housing (B) on workbench with surface of fuel pump adapter
facing down toward bench.
20.
Remove pinion ring gearshaft (U) from power takeoff housing (B).
21.
Remove pinion drive gearshaft (V) from power takeoff housing (B).
22.
Position power takeoff housing (B) on a workbench with cover surface facing down.
23.
Using brass punch and hammer, drive housing bushing (W) from power takeoff housing
(B).
Go on to Sheet 5
3-17