• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Power Takeoff Installation On Replacement Engine (Sheet 11 of 11)
Accessory Drive Installation On Unserviceable Engine (Sheet 2 of 7)

TM-5-5420-202-34 M60A1 Tank Chassis Transporting: for Bridge Armored-Vehicle-Launched; Scissoring Type Class 60 (5420-00-889-2020) Manual
Page Navigation
  57    58    59    60    61  62  63    64    65    66    67  
TM 5-5420-202-34
ENGINE REPLACEMENT
Accessory Drive Installation On Unserviceable Engine (Sheet 1 of 7)
NOTE
Replacement engines are received without the power takeoff unit installed.
The power takeoff parts on the unserviceable engine must be exchanged
with the accessory drive parts of the replacement engine.
TOOLS:
7/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
9/16 in. socket with 1/2 in. drive
5/8 in. socket with 1/2 in. drive (2 required)
13/16 in. socket with 1/2 in. drive
8 in. socket extension with 1/2 in. drive
9/16 in. combination box and open end wrench
5/8 in. combination box and open end wrench (2 required)
7/8 in. combination box and open end wrench
13/16 in. combination box and open end wrench
5/16 in. socket head key
11/16 in. socket wrench with 1/2 in. drive
Stud  remover/installer
SUPPLIES:
Accessory drive and attaching parts - retained from replacement engine
Rags (Item 28, Appendix B)
REFERENCE:
TM 5-5420-202-20
1.
Install adapter ring (A), ring (B), and
adapter (C) on engine damper.
2.
Using 13/16 inch socket and extension,
secure adapter (C) with six bolts (D).
Using stud remover/installer, install
3.
eight studs (E) on engine housing.
Go on to Sheet 2
3-50






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.