PARKING BRAKE TUBE ASSEMBLY REPLACEMENT (Sheet 4 of 4)
From crew compartment, adjust tube
assembly (D) to make sure tube extends
past clamp (F) 3/4 of an inch.
Install screw (G) to secure clamp (F)
to hull. Using 1/2 inch wrench, tighten
From engine compartment, using two
1/2 inch wrenches, tighten screws and
nuts (E) securing clamps (C).
Install right fuel tank (page 4-17).
Install control assembly (TM 5-5420-202-20).
End of Task