c. Assembly of the MLC 70 Bridge - CONT
(11) Installation of Far Shore Forward Transverse Brace.
The transverse brace is installed with the slots in the bottom of the brace.
(a) Using four bolts (1), install forward transverse brace (2) to male and female bridge
sections (3) and (4).
(b) Tighten bolts (1).
(12) Installation of Far Shore Lateral Brace.
Be sure previously attached components line up on same side of clip angles as opposite section.
(a) Align the lateral brace (5) with holes on the bottom flange of the inside girders of
bridge sections (3) and (4). Place four bolts (6) through holes with heads of bolts to
(b) Tighten bolts (6).
2-44 Change 2