FAR-SHORE RAMP SECTION REPLACEMENT (Sheet 1 of 2)
General Mechanics Tool Box SC 5180-90-N26
Lifting Device (8000 lbs capacity)
Sling, Multiple Leg
Flexible Hydraulic lines removed (Diaphragm) (pg 3-32).
Far-Shore Ramp Section Transverse Brace removed (pg 3-36).
REMOVE FAR-SHORE RAMP SECTION (7).
FRH hydraulic fluid may contain
Tricresyl Phosphate (TCP) which, if
taken internally, can cause paralysis.
Hydraulic fluid may be absorbed
through the skin. If hydraulic fluid gets
on skin, wash with soap and water as
soon as possible.
a. Release hydraulic pressure by turning
manual hydraulic bleed valves (1) and (2)
located within the protective housings (3)
on both ends of hydraulic cylinder (4).
b. Remove four retaining pins (5) from four
locking and connecting pins (6). Remove four
locking and connecting pins (6) securing ramp
section (7) to center section (8).
C. Using lifting device and sling, separate
damaged ramp section (7) from adjoining
center section (8) a distance of about 1 ft.