ALR CLEANER MANIFOLD AND RELATED PARTS REPLACEMENT (Sheet 2 of 4)
Using screwdriver, loosen clamps (A)
securing hose (B).
Slide hose (B) back onto elbow (C).
Using screwdriver, loosen four clamps (D)
securing two hoses (E) to manifold (F) and
precleaned tubes (G).
Using 7/16 inch wrench, remove four screws (H) and lockwashers (J) securing manifold (F)
to side of housing.
Using 1/2 inch socket, remove screw (K) and lockwasher (L) securing bracket (M) to
bottom of housing.
Slide hoses (E) onto manifold (F) until hoses are even with edge of manifold. Turn mani-
fold until both inlet tubes are facing up. Remove clamps (D).
Remove manifold (F) from housing.
Remove and discard hoses (E) and gasket
(N) from manifold (F).
Using 7/16 inch wrench, remove screw (P)
and lockwasher (Q) securing bracket (M)
to manifold (F).