TM 5-5420-226-20-3
ENGINE OIL TEMPERATURE TRANSMITTER REPLACEMENT (Sheet 3 of 3)
2. Using 15/16 inch wrench, install new
transmitter (A) into engine.
3. Push socket of rubber insulated connector (B) into
transmitter cap (C).
4. Remove rags from under transmitter.
5. Using 1/2 inch wrench, install self-locking
nut and clamp (D).
6. Connect engine for powerplant ground hop
(page 5-26).
7. Start and run engine. Observe oil temperature
indicator for normal oil temperature.
8. Shut down engine. Disconnect engine from powerplant ground hop (page 5-40).
9. Install powerplant (page 5-14).
TA168877
End of Task
10-226