TM 5-5420-226-20-3
DUST DETECTOR WARNING LIGHT BOX ASSEMBLY AND MOUNTING BRACKET
REPLACEMENT (Sheet 2 of 2)
INSTALLATION:
If mounting bracket (A) was removed,
1.
position it to vehicle support. Using
wrench, install two screws (B) and
lockwashers (C) to secure mounting
bracket.
Position dust detector warning light box
2.
assembly (D) to mounting bracket (A) l
Using wrenches, install two screws (E),
3.
lockwashers (F), and nuts (G) to secure
dust detector warning light box assembly (D).
Connect harness connector (H) to dust
4.
detector warning light box assembly (D).
End of Task
10-298.15
Change 1