SHIFTING CONTROL AND RELATED PARTS REPAIR AND REPLACEMENT (Sheet 4 of 14)
Using pliers, remove cotter pin (A) (hidden)
and headed straight pin (B).
Using hammer and 1/8 inch punch, drive
out spring pin (C) from base assembly
clevis and straight pin (D).
Remove straight pin (D).
Remove parking brake lever (E) and
attached hardware from base assembly
Holding clevis (G) with 3/4 inch open
end wrench, use 1/2 inch open end wrench
to back off nut (H). Remove clevis
(G) and nut (H).
Go on to Sheet 5