TM 5-5420-226-20-3
FRONT STEERING CONTROL TUBE REPLACEMENT (Sheet 3 of 3)
INSTALLATION:
Using 9/16 inch wrench, install jamnuts (A) and rod ends (B) on rod.
1.
Using steel tape, measure between centers of holes in rod ends (B).
2.
3.
Using 9/16 inch wrench, turn rod ends (B) until recorded measurement is obtained.
4.
Using torque wrench and crowfoot adapter, tighten jamnut (A) against rod ends (B) to a
minimum torque of 192 lb-in, (22 N m).
Aline rod end (B) in link (C).
5.
6. Using 9/16 inch wrench, install bolt (D) in link (C).
7.
Aline other rod end (B) in link (E).
8.
Using 9/16 inch wrench, install bolt
(F) in link (E).
Test operation of front steering control
9.
tube (G) in linkage (TM 5-5420-226-10).
End of Task
TA169375
15-15