• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
DOOR ASSEMBLY (ESCAPE HATCH) REPLACEMENT - Continued
DOOR ASSEMBLY (ESCAPE HATCH) REPAIR - Continued

M48A5 Tank Chassis, Transporting: For Bridge, Armored-Vehicle-Launched; Scissoring Type, Class 60 -3 Page Navigation
  941    942    943    944    945  946  947    948    949    950    951  
img
. .
TM 5-5420-226-20-3
DOOR ASSEMBLY (ESCAPE HATCH) REPAIR (Sheet 1 of 3)
Wire brush
TOOLS:
Putty knife
Drive pin punch
5/16 inch open end wrench
3/16 inch socket head key wrench (allen wrench)
Hammer
Pliers, retaining ring
SUPPLIES:
Dry cleaning solvent (Item 55, Appendix D)
Rags (Item 65, Appendix D)
Silicone compound (Item 32, Appendix D)
Seal 7984290
Retaining rings MS16624-1050 (two required)
PRELIMINARY PROCEDURE:
Remove hatch from vehicle (page 16-40)
DISASSEMBLY:
1.
Using putty knife, carefully pry out
seal (A) from groove in door assembly
(B).
Cleaning agent specified is flammable. Use only in well ventilated areas. Keep
away from flames, sparks, or heat. Do not smoke while using. Prevent contact
with eyes, mouth, and/or skin. Wear rubber gloves when performing cleaning
procedures.
2.
Using wire brush, rags, and solvent,
clean seal mating surfaces.
TA169454
Go on to Sheet 2
16-42






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.