TM-5-5420-279-10
12.7.2 Flatrack Movements for Restricted
Site
12.7.2.1
When operating on a site that has restricted width it will be necessary to modify the
flatrack positioning procedure to accommodate the reduced width of the site.
12.7.2.2
The first flatrack brought on to the build site will be flatrack LVT, so that the launch
beam can be constructed.
12.7.2.3
Once the launch beam has been built flatrack LVT is removed to the staging area
and flatrack V1 is brought to the site and positioned towards the rear of the crane
stabilizer leg, the next flatrack T1 is brought to the site and positioned in front of
flatrack V1.
12.7.2.4
The approach ramps (AR) are removed from the ramp module and stored, until
required, in front of the launch vehicle.
12.7.2.5
Bridge construction is commenced and once flatracks T1 and V1 are empty, they are
removed and replaced with flatracks V2 and T2.
12.7.2.6
When the bridge has been constructed flatracks V2 and T2 are removed to the
staging area and flatrack LVT is returned to the build site, the launch beam is then
recovered.