TM 5-1940-277-34
ENGINE WIRING HARNESS REPLACEMENT INSTRUCTIONS
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools:
Equipment Condition:
Condition Description:
Flat tip screwdriver (stubby)
TM 5-1940-277-20
Battery hatch open.
Diagonal cutting pliers
TM 5-1940-277-20
Batteries disconnected.
7/16 in open end wrench
TM 5-1940-277-20
Engine hatches open.
7/32 in socket, 1/4 in drive
TM 5-1940-277-20
Control box cover
1/2 in socket, 3/8 in drive
removed.
11 mm socket, 1/4 in drive
8 mm socket, 1/4 in drive
7 mm socket, 1/4 in drive
1/4 in drive ratchet
3/8 in drive ratchet
1-5/8 in open end wrench
Materials/Parts:
Engine wiring harness
Tape, electrical, plastic
Ties, cable, nylon
2-93