REMOVAL - TM-5-1940-277-34

MAST WIRING HARNESS REPLACEMENT INSTRUCTIONS - UPPER (Continued) - TM-5-1940-277-34_160

MAST WIRING HARNESS REPLACEMENT INSTRUCTIONS - UPPER (Continued) - TM-5-1940-277-34_162

TM-5-1940-277-34 Boat Bridge Erection Twin Jet Aluminum Hull Model USCSBMK1 (1940-01-105-5728) Manual
Page Navigation
144

TM 5-1940-277-34 MAST WIRING HARNESS REPLACEMENT INSTRUCTIONS - UPPER (Continued) LOCATION ITEM ACTION REMARKS REMOVAL 1. Mast (1) a. Light sockets Remove. Reference TM (upper section) (2), naviga- 5-1940-277-20. tion, anchor) b. Plug (3) Unscrew from socket. 2. Plug (3) a. Plug nut (4) Remove. Use 7/8 in wrench. b. Plug retain- Remove. Use screwdriver. ing screw (5) and washer (6) c. Plug core (7) Pull out of plug case (8). NOTE Before next step draw diagram of wire color to pin number connections. Pin numbers are on plug face. d. 4 wire a. Loosen Use screwdriver. retaining screws. screws (9) and wire harness (10) b. Pull wires Retain plug core out of plug for installation core (7). on new harness. e. Plug nut (4), Remove and retain retaining nut to be reused. (11), plug case (8), plastic shield (12), washer (13), rubber grommet (14) and washer (15) 2-135

Privacy Statement
Press Release
Contact