REMOVAL (cont) - TM-5-1940-277-34

ENGINE MOUNTS AND BRACKETS REPLACEMENT INSTRUCTIONS (Continued) - TM-5-1940-277-34_189

ENGINE MOUNTS AND BRACKETS REPLACMENT INSTRUCTIONS (Continued) - TM-5-1940-277-34_191

TM-5-1940-277-34 Boat Bridge Erection Twin Jet Aluminum Hull Model USCSBMK1 (1940-01-105-5728) Manual
Page Navigation
173

TM 5-1940-277-34 ENGINE MOUNTS AND BRACKETS REPLACMENT INSTRUCTIONS (Continued) LOCATION ITEM ACTION REMARKS b. Engine a. Attach lifting assembly sling to lifting eyes. b. Raise only as high as neces- sary. For bracket, replacement, take weight off bracket. For mount replacement, clear mounting bolt (approx. 1-1/2 in). NOTE Remove and replace only defective bracket or mount. c. Starboard a. Remove. Use 5/8 in front socket, 1/2 in bracket (12), drive ratchet. 3 cap screws (13), lock- b. Discard washers (14) lockwashers. d. Port front a. Remove. Use 5/8 in bracket (15), socket, 1/2 in 3 bolts (16), drive ratchet 3 lockwashers and 11/16 in (17), 3 nuts box wrench. (18) b. Discard lockwashers. 2-165

Privacy Statement
Press Release
Contact