TM 5-1940-277-34
ENGINE MOUNTS AND BRACKETS REPLACMENT INSTRUCTIONS (Continued)
LOCATION
ITEM
ACTION
REMARKS
d.
Fuel return
Install on
Use 1/2 in
line bracket
starboard rear
socket with 1/2
(22) and
bracket (19).
in drive
cap screw (23)
ratchet.
e.
Port front
Install securing
Use 5/8 in
bracket (15),
bracket to front
socket, 1/2 in
3 bolts (16),
support brackets.
drive ratchet
3 lockwashers
and 11/16 in
(17), and 3
open end wrench.
nuts (18)
f.
Starboard
Install securing
Use 5/8 in
front brac-
bracket to
socket and 1/2
ket (12), 4
cylinder block.
in drive
bolts (13)
ratchet.
and 4 lock-
washers (14)
g.
Engine
Lower onto
If necessary,
assembly
mounts (24).
loosen bracket
and reposition
slightly for
correct seating
on mount. Re-
tighten bracket.
h.
4 nuts (10)
Install,
Use 3/4 in
and 4
securing engine
socket and torque
washers (11)
to mount.
wrench, 0 - 175
Torque 30 - 35
ft-lb capacity.
ft-lb (4.15 to
4.84 kgfm).
i.
Engine
Remove lifting
assembly
sling.
2-169
