TM 5-1940-277-34
STARTER MOTOR REPAIR INSTRUCTIONS
(Continued)
LOCATION
ITEM
ACTION
REMARKS
b. Hold lock collar (29)
in this position.
c. Unscrew pinion
until helix
disengages.
d. Slide pinion and
end shield off
shaft.
e. Collect 6 lock
balls (30) and
4 overspeed
balls (31).
4.
Armature (22)
Armature (22)
Remove from vise.
5.
Pinion (28)
a. Snap ring
Remove from end
Use snap ring
(32), trip
of pinion
pliers.
collar (33),
sleeve (76).
lock collar
spring (34),
and lock
collar (29)
b. Snap ring
Discard.
(32)
c. Pinion (28)
a. Carefully
Use honing stone.
remove any
burrs on
pinion.
b. Withdraw
from drive
end shield (1).
2-197
