DISASSEMBLY - TM-5-1940-277-34

STARTER MOTOR REPAIR INSTRUCTIONS (Continued) - TM-5-1940-277-34_215

STARTER MOTOR REPAIR INSTRUCTIONS (Continued) - TM-5-1940-277-34_217

TM-5-1940-277-34 Boat Bridge Erection Twin Jet Aluminum Hull Model USCSBMK1 (1940-01-105-5728) Manual
Page Navigation
199

TM 5-1940-277-34 STARTER MOTOR REPAIR INSTRUCTIONS (Continued) LOCATION ITEM ACTION REMARKS DISASSEMBLY 1. Drive end a. 2 core plugs Remove and Use punch and shield (1) (2) discard. ball peen ham- mer. Use new plugs when reassembling. b. 2 screws (3) Unscrew and Use 5/16 in and 2 lock- remove, relea- socket and washers (4) sing field ratchet. terminal leads. 2. Commutator end a. Commutator Loosen fixing Use flat tip shield (5) cover (6) screw (7) and screwdriver. remove. b. 4 brush lead Remove, freeing Use flat tip screws (8) brush lead. screwdriver. and 4 lock- washers (9) c. 4 brushes (10) a. Raise springs (11) and remove. b. Discard. d. End cap (12) Remove. Use 1-1/8 in box and steel wrench. Be ball (13) careful of steel ball (11) which is under spring pressure. e. Spring (14), Remove. Use snap ring snap ring (15), pliers. thrust washer (16), shim washers (17) 2-193

Privacy Statement
Press Release
Contact