TM 5-1940-277-34
CYLINDER HEAD ASSEMBLY REPLACEMENT INSTRUCTIONS
(Continued)
LOCATION
ITEM
ACTION
REMARKS
b.
Head gasket
a.
Apply thin
(4)
smear of
clean grease
on both sides
of gasket.
b.
Position on
block over
thimble dowels.
c.
Cylinder
Place in posi-
Use two persons
head
tion on block.
or lifting
assembly (1)
device.
Do not
damage gasket.
4.
Cylinder head
23 bolts (2) and
a.
Smear threads
assembly (1)
2 bolts (3)
and underside
of bolts liber-
ally with clean
engine oil.
b.
Install
Make sure two
finger
extension bolts
tight.
(5) for mounting
intercooler are
in numbers 5 and
12 positions.
CAUTION
Under no circumstance torque bolts more than specified. Severe metal
fatigue may result.
c.
Torque bolts
Use 3/4 in soc-
evenly in
ket and torque
sequence to
wrench.
Turn
50 ft-lb
each bolt in
then to 95
sequence 1/2
ft-lb.
turn at a time
until specified
torque reached.
2-295
