TM 5-1940-277-34
STEERING ASSEMBLY REPAIR INSTRUCTIONS - ROTARY CONTROL ASSEMBLY
(Continued)
LOCATION
ITEM
ACTION
REMARKS
DISASSEMBLY
1.
Rotary control
a.
Ball joint
Remove. Take
Use two 17 mm
assembly
pivot nut (1)
pivot (14) out
wrenches.
and washer
of crank (5).
(2)
b.
3 socket head
Remove and
Use 7/32 in hex
screws (3)
retain.
key wrench
and 3 washers
(Allen).
(4)
c.
Crank (5)
Remove crank and
Use hands.
cone (6) as unit.
d.
Cover (7)
Remove four
Use screwdriver.
screws (8) and
put cover aside.
e.
Seal (9)
Pull out of
Use seal puller.
cover and discard.
f.
Seal sleeve
Pull out and
Make sure bearing
(10)
retain.
(11) does not
pull out with
sleeve.
g.
Front bearing
Remove and
(11)
retain.
h.
Cable wheel
Remove and
Cable wheel is
(12)
retain.
packed in grease.
Rear bearing may
stick to wheel.
i.
Rear bearing
Remove.
(13)
2-411