TM 5-1940-277-34
HYDROJET ASSEMBLY REPAIR INSTRUCTIONS - TWO STAGE IMPELLER SECTION
This task covers:
a.
Disassembly
b.
Inspection
c.
Assembly
INITIAL SETUP
Tools:
Equipment Condition
Condition Description
30 mm socket
Page 2-353
Hydrojet assembly
Torque wrench (0 - 175 ft-lb)
removed from boat.
8 mm hex key wrench (Allen)
12 mm open/box wrench
13 mm open end wrench
Snap ring pliers
Strap wrench
Long nose pliers
Ratchet
Feeler gage
Materials/Parts:
Gaskets
Shaft seals
Front reaction case gaskets
Grease
O-rings
Personnel Required: Two
3-165
