REMOVAL (cont) - TM-5-1940-277-34

FUEL TANK REPLACEMENT INSTRUCTIONS (Continued-)

FUEL TANK REPLACEMENT INSTRUCTIONS (Continued) - TM-5-1940-277-34_77

TM-5-1940-277-34 Boat Bridge Erection Twin Jet Aluminum Hull Model USCSBMK1 (1940-01-105-5728) Manual
Page Navigation
59

TM 5-1940-277-34 FUEL TANK REPLACEMENT INSTRUCTIONS (Continued) LOCATION ITEM ACTION REMARKS CAUTION Minor fuel leakage will happen when disconnecting fuel lines. Exercise care to prevent fuel from contaminating flotation blocks. b. Vent hose at Loosen clamp Use screwdriver. vent pipe (13) and remove. c. Fuel level Disconnect at a. Do not discon- sender lead first connection nect right at (14) away from sender sender. (unplug). b. If there is need to remove sender, see TM 5-1940-277-20 for instruc- tions. NOTE Fuel tank is squeeze-fitted into its space using packing. Tank is not secured by any other means. d. Main fuel Remove valve and See TM valve (3) tee fitting. 5-1940-277-20. e. Fuel tank Lift tank out Use at least (1) of its space three persons. by handles (15). Lift forward end and carefully pull tank under battery box (16) up into forward cockpit. Lift the rear end of fuel tank into cockpit as shown in figure. 2-43

Privacy Statement
Press Release
Contact