TM 5-1940-277-34
FUEL TANK REPLACEMENT INSTRUCTIONS (Continued)
LOCATION
ITEM
ACTION
REMARKS
TEST:
WARNING
Do not weld used tank. Tank may explode. Severe burns can result.
WARNING
Always use safety goggles when using dry compressed air for cleaning. Do not use pressures
greater than 30 psi. High air pressure can cause injury and cut the skin.
4.
Fuel tank (1)
Fuel tank (1)
Test tank for
Use air compres-
leaks:
sor and air
control valve
assembly.
a.
Close all
openings.
b.
Fit air
nozzle.
c.
Pressurize to
2-1/2 PSI.
d.
Read pressure
after 15 min.
If there has
been a pressure
loss, replace
tank.
e.
If pressure
held, release
pressure, remove
plugs and air
nozzle.
Change 1 2-45
