INSTALLATION - TM-5-1940-277-34

FUEL TANK REPLACEMENT INSTRUCTIONS (Continued) - TM-5-1940-277-34_81

DRAIN DOWN VALVE REPLACEMENT INSTRUCTIONS (MK1)

TM-5-1940-277-34 Boat Bridge Erection Twin Jet Aluminum Hull Model USCSBMK1 (1940-01-105-5728) Manual
Page Navigation
65

TM 5-1940-277-34 TM 1940-34/3 FUEL TANK REPLACEMENT INSTRUCTIONS (Continued) LOCATION ITEM ACTION REMARKS c. Vent hose at Connect, Use screwdriver. vent pipe (13) tighten hose clamp at vent pipe (13). d. Main fuel a. Apply pipe Item 2, APP. B valve (3) tape. See TM 5-1940-277-20. b. Install. e. 6 ea. fuel Connect. Use 5/8 in open lines at con- end box wrench. nections (11, 12, 4) 7. Battery box (16) a. Tie bar (7), Install. Use 1/2 in box 2 nuts (8), wrench and 1/2 in 2 washers (9), open end wrench. and 2 bolts (10) b. Center line a. Apply rubber Items 12 and 13 deck plate base adhe- APP. B. (5) sive and rub- ber gasket material (17) b. Position deck plate (5) using markings. c. Rivet in Use 1/4 in alumi- place. num blind rivets and blind riveter, hand. NOTE Be careful to clean up clipped rivet pieces. It is possible that rivet cores are non-compatible metal which will cause corrosion spots if accidentally dropped in bilges. Change 4 2-49/(2-50 Blank)

Privacy Statement
Press Release
Contact