TM 5-1940-322-24
0021 00
HATCHET BRACKETS REPLACEMENT (Contd)
NOTE
If rivets are present, drill out and replace with screws, washers,
and locknuts. Refer to TM 5-1940-322-24P for all mounting
hardware.
REMOVAL
1.
Remove four locknuts (5), eight washers (3), four screws (2), and hatchet blade bracket (6) from
forward cockpit (1). Discard locknuts (5).
2.
Remove two locknuts (5), four washers (3), two screws (2), and hatchet handle bracket (4) from
forward cockpit (1). Discard locknuts (5).
INSTALLATION
1.
Install hatchet handle bracket (4) on forward cockpit (1) with two screws (2), four washers (3), and two
new locknuts (5).
2.
Install hatchet blade bracket (6) on forward cockpit (1) with four screws (2), eight washers (3), and
four new locknuts (5).
1
~
2
2
3
3
4
6
3
5
5
3
END OF WORK PACKAGE
0021 00-2
