TM 5-1940-322-24
0049 00
HORN REPLACEMENT (Contd)
CAUTION
Support horn during removal and installation. Failure to comply
may result in damage to equipment.
REMOVAL
1. Disconnect electrical leads (1) from horn connections (2).
2. Remove two locknuts (9), four washers (7), two screws (6), and horn (3) from bracket (10). Discard
locknuts (9).
3. Remove two screws (5), two lockwashers (4), and bracket (8) from horn (3). Discard lockwashers (4).
INSTALLATION
1. Install bracket (8) on horn (3) with two new lockwashers (4) and screws (5).
2. Install horn (3) on bracket (10) with two screws (6), four washers (7), and two new locknuts (9).
3. Connect two electrical leads (1) to horn connectors (2).
3
4
5
2
1
6
1
7
8
10
7
9
END OF WORK PACKAGE
0049 00-2
