TM 5-1940-322-24
0054 00
BATTERY CABLES MAINTENANCE (Contd)
CLEANING AND INSPECTION
1.
For general cleaning and inspection instructions, refer to WP 0013 00.
2.
Inspect battery cables for damage. Replace if damaged.
3.
Inspect battery cables and lead wires for corrosion. Clean with wire brush if corroded.
INSTALLATION
NOTE
The battery starter cables are installed the same way on both
engines. Steps 1 and 2 apply to the port side engine.
Add coat of silicone compound to terminals prior to installation.
1.
Install lead wires (8) and (7) and battery cable (6) on engine starter (9) with new lockwasher (4) and
nut (5).
2.
Install lead wire (1) and battery ground cables (2) and (3) on engine starter (9) with new
lockwasher (4) and nut (5).
3.
Install battery cables (10) and (13) on emergency link solenoid (14) with two new lockwashers (11) and
nuts (12).
~
14
1
2
3
13
10
4
11
5
4
11
5
9
12
6
7
8
0054 00-6
