TM 5-1940-322-24
0084 00
FUEL INJECTOR PLUMBING REPLACEMENT (Contd)
FUEL INJECTOR LINE INSTALLATION
CAUTION
Do not bend fuel lines when removing or installing lines. Failure to
comply may result in damage to equipment.
1. Hand-tighten fuel lines (1) on fuel injectors (2) and fuel injection pump (3).
2. Install six tube braces (4) and (9) on fuel injectors (2) with six screws (10).
3. Secure six vibration isolators (5) on fuel lines (1), tube braces (4) and (9) with three support
brackets (6), six washers (7), and screws (8). Tighten screws (8) to 53 lb-in. (6 Nm).
4. Tighten fuel lines (1) on fuel injectors (2) and fuel injection pump (3) to 22 lb-ft (30 Nm).
0084 00-6
