TM 5-1940-322-24
0087 00
BELT TENSIONER REPLACEMENT (Contd)
REMOVAL
NOTE
The belt tensioner on both engines are replaced the same way. This
procedure covers replacement of the belt tensioner on one engine.
Remove screw (3) and tensioner (2) from bracket (1).
INSTALLATION
CAUTION
Ensure that belt tensioner tang is aligned with hole in the engine
bracket before tightening screw. Failure to comply may result in
damage to equipment.
1. Install tensioner (2) on bracket (1) with screw (3). Tighten screw (3) to 32 lb-ft (43 Nm).
3. Close engine hatches (TM 5-1940-322-10).
0087 00-2