TM 5-1940-322-24
0117 00
TRANSMISSION OIL COOLER REPLACEMENT (Contd)
CAUTION
Cap or plug all hoses, connections, and openings immediately after
disconnection to prevent contamination. Remove caps or plugs prior
to installation. Failure to comply may result in damage to
equipment.
NOTE
The transmission oil coolers on both engines are replaced the same
way. This procedure covers the replacement of one transmission oil
cooler.
Have container ready to catch transmission oil.
REMOVAL
1.
Remove two hose clamps (6) and raw water hoses (5) and (10) from transmission oil cooler (1).
2.
Remove transmission oil cooler hoses (7) and (9) from transmission oil cooler (1).
3.
Remove four nuts (3), two U-bolts (8), rubber mounting pad (4), and transmission oil cooler (1) from
bracket (2).
INSTALLATION
CAUTION
Do not over tighten nuts securing transmission oil cooler to
bracket. Failure to comply may result in damage to transmission oil
cooler.
1.
Install transmission oil cooler (1) and rubber mounting pad (4) on bracket (2) with two U-bolts (8) and
four nuts (3).
2.
Install transmission oil cooler hoses (7) and (9) on transmission oil cooler (1).
3.
Install raw water hoses (5) and (10) on transmission oil cooler (1) with two hose clamps (6).
4.
Fill transmission with oil (WP 0012 00).
5.
Install aft cockpit (WP 0016 00).
6.
Close engine hatches (TM 5-1940-322-10).
0117 00-2
