TM 5-1940-322-24
0118 00
TRANSMISSION OIL COOLER PLUMBING MAINTENANCE (Contd)
INSTALLATION
1.
Apply thin coat of sealing compound on threads of adapter (14).
2.
Install adapter (14) on pipe (8).
3.
Install pipe (8) on boat frame (9) with three clamps (11), screws (10), washers (12), and nuts (13).
4.
Install hose (7) on raw water filter (6) with two hose clamps (2).
5.
Install hose (7) on pipe (8) with two hose clamps (2).
6.
Install hose (16) on adapter (14) with hose clamp (15).
7.
Install hose (1) on pipe (8) with two hose clamps (2).
8.
Install hose (4) and (1) on transmission oil cooler (3) with two hose clamps (2).
9.
Install hose (4) on exhaust elbow (5) with hose clamp (2).
10.
Launch boat in water (TM 5-1940-322-10).
11.
Start engine and check for leaks (TM 5-1940-322-10).
12.
Close hydrojet hatches (TM 5-1940-322-10).
13.
Install aft cockpit (WP 0016 00).
0118 00-4
