TM 5-1940-322-24
0126 00
ELECTRIC BILGE PUMP, BRACKET, AND FLOAT REPLACEMENT (FORWARD) (Contd)
NOTE
Tag all wires during removal to assist with installation.
REMOVAL
1.
Disconnect lead wires (1) and (19) from bilge pump (2) and bilge pump float (18).
2.
Remove clamp (3) and disconnect hose (4) from bilge pump (2).
3.
Remove two locknuts (12), four washers (6), two screws (9), and bilge pump bracket (11) from hull (10).
Discard locknuts (12).
4.
Remove three screws (9), lockwashers (17), and float bracket (16) from hull (10). Discard
lockwashers (17).
5.
Remove two locknuts (13), four washers (15), two screws (14), and float cover (20) from float
bracket (16). Discard locknuts (13).
6.
Remove two screws (14), four washers (15), two locknuts (13), and float (18) from float bracket (16).
Discard locknuts (13).
7.
Remove bilge pump (2) from bilge pump strainer (8) on bilge pump bracket (11) by releasing clips (7).
8.
Remove four screws (5), eight washers (6), four locknuts (13), and bilge pump strainer (8) from
bracket (11). Discard locknuts (13).
INSTALLATION
1.
Install bilge pump strainer (8) on bilge pump bracket (11) with four screws (5), eight washers (6), and
four new locknuts (12).
2.
Install bilge pump (2) on bilge pump strainer (8). Ensure clips (7) are seated properly.
3.
Install float (18) on float bracket (16) with two screws (14), four washers (15), and two new
locknuts (13).
4.
Install float cover (20) on float bracket (16) with three screws (14), four washers (15), and two new
locknuts (13).
5.
Install float bracket (16) on hull (10) with three screws (9) and new lockwashers (17).
6.
Install bilge pump bracket (11) on hull (10) with two screws (9), four washers (6), and two new
locknuts (12).
7.
Install hose (4) on bilge pump (2) with clamp (3). Tighten clamp (3).
8.
Connect lead wires (1) and (19) to bilge pump (2) and bilge pump float (18).
9.
Close engine hatches (TM 5-1940-322-10).
10.
Connect battery ground cables (WP 0054 00).
11.
Test bilge pump and float, ensure light illuminates on instrument panel (TM 5-1940-322-10).
12.
Close battery hatch (TM 5-1940-322-10).
0126 00-2
