TM 5-1940-322-24
0136 00
STEERING HYDRAULIC CYLINDER AND MOUNTING BRACKET MAINTENANCE (Contd)
INSTALLATION (Contd)
6.
Install steering hydraulic cylinder (11) on ball clamp base (12) with ball clamp (10), two washers (9),
and screws (8).
7.
Apply light coat of sealing compound (243) on threads of cylinder rod (4).
8.
Install clevis (1) on cylinder rod (4) as noted at removal. Tighten jam nut (3).
9.
Apply light coat of sealing compound (243) on threads of screws (13).
10.
Install ball clamp base (12) on mounting bracket (19) with four washers (14) and screws (13). Tighten
screws (13) to 1314 lb-ft (1719 Nm).
11.
Install hydraulic hoses (7) and (5) on adapters (6).
12.
Install clevis (1) and tie rod (24) on hydrojet steering lever (22) with screw (25), two washers (23),
washer (16), and new locknut (15). Tighten locknut (15) to 170180 lb-ft (231244 Nm).
13.
Bleed steering hydraulic system (WP 0031 00).
14.
Check for leaks and correct operation of steering system (TM 5-1940-322-10).
15.
Close port side hydrojet hatch (TM 5-1940-322-10).
5
8
9
7
2
10
2
6
3
4
1
11
25
12
15
13
16
17
14
18
19
23
24
22
20
21
END OF WORK PACKAGE
0136 00-3/(4 blank)
