TM 5-1940-322-24
0137 00
HYDROJET STEERING DEFLECTOR, ROD, AND PIVOT MAINTENANCE (Contd)
INSTALLATION (Contd)
9.
Position screw (15) and steering pivot (14) down on inside nozzle (18) through fiber washers (17) and
steering deflector (13).
10.
Install two fiber washers (12), washers (11), and new locknuts (10) on screws (15). Tighten
locknuts (10) to 4448 lb-ft (6065 Nm).
11.
Position pivot (21) on steering deflector lever ball socket (9).
12.
Position push rod (24) back and install push rod (24) on pivot (21) with washer (22), screw (23),
washer (19), and new locknut (20). Tighten locknut (20) to 1314 lb-ft (1719 Nm).
13.
Install tie rod and steering cylinder on steering levers (WP 0139 00).
14.
Install hydrojet reverse deflector (WP 0140 00).
15.
Close hydrojet hatches (TM 5-1940-322-10).
3
4
5
2
1
28
6
30
29
27
7
25
26
17
24
16
8
10
9
18
14
16
23
19
11
17
15
12
12
20
22
11
21
10
15
13
14
END OF WORK PACKAGE
0137 00-3/(4 blank)
