TM 5-1940-322-24
0143 00
RIFLE MOUNT SUPPORT AND BRACKET REPLACEMENT (Contd)
NOTE
Both rifle mount supports and brackets are replaced the same way.
This procedure covers the replacement of one rifle mount support
and bracket.
REMOVAL
1. Remove two locknuts (2), washers (3), lanyard (6), and screws (5) securing catch mount (4) and
lever (7) on cockpit (1). Discard locknuts (2).
2. Remove two rivets (8) and support (9) from floor plate (10). Discard rivets (8).
INSTALLATION
1. Install support (9) on floor plate (10) with two new rivets (8).
2. Position catch mount (4) and lever (7) on cockpit (1).
3. Install catch mount (4), lever (7), and lanyard (6) on cockpit (1) with two screws (5), washers (3), and
new locknuts (2).
4
2
3
5
6
1
7
1
~
8
9
10
END OF WORK PACKAGE
0143 00-2
