TM 5-1940-322-24
0146 00
AUTOMATIC FIRE EXTINGUISHER BRACKET AND MOUNTING PLATE REPLACEMENT (Contd)
REMOVAL
1.
Disconnect harness (11) from harness (10).
2.
Loosen two clamps (12) and remove automatic fire extinguisher (1) from bracket (4).
3.
Remove four locknuts (2), washers (3), and bracket (4) from mounting plate (6) and screws (7).
Discard locknuts (2).
4.
Remove four nuts (5) and screws (7) from mounting plate (6).
5.
Inspect mounting plate (6) for damage. If damaged, drill out four rivets (8) and remove mounting
plate (6) from engine compartment (9). Discard rivets (8).
INSTALLATION
1.
If removed, install mounting plate (6) on engine compartment (9) with four new rivets (8).
2.
Install four screws (7) and nuts (5) on mounting plate (6).
3.
Install bracket (4) on mounting plate (6) and screws (7) with four washers (3) and four new
locknuts (2).
4.
Install automatic fire extinguisher (1) on bracket (4) with two clamps (12). Tighten clamps (12).
5.
Connect harness (11) to harness (10).
6.
Close engine hatches (TM 5-1940-322-10).
6
7
5
4
3
2
1
8
9
12
~
11
10
END OF WORK PACKAGE
0146 00-2
