TM 5-1940-322-24
0148 00
HANDHELD FIRE EXTINGUISHER BRACKET REPLACEMENT (Contd)
NOTE
If rivets are present, drill out and replace with screws, washers,
and locknuts. Refer to TM 5-1940-322-24P for all mounting
hardware.
REMOVAL
1.
Release clamp (5) and remove handheld fire extinguisher (6) from bracket (4).
2.
Remove two locknuts (7), four washers (3), two screws (2), and bracket (4) from forward cockpit (1).
Discard locknuts (7).
INSTALLATION
1.
Install bracket (4) on forward cockpit (1) with two screws (2), four washers (3), and two new
locknuts (7).
2.
Install handheld fire extinguisher (6) on bracket (4) with clamp (5).
1
~
2
3
3
4
7
5
6
END OF WORK PACKAGE
0148 00-2
